Is a practical easy to use sanitizer for spa and hot tub water.
It rapidly and completely dissolves to provide effective bromine disinfection
without cloudy or insoluble residue in the water.
Is a super oxidation
treatment to rid spa water of organic waste such as perspiration, body oil,
cosmetics that tend to cloud water.
Can be used as a pre-treatment to
create a bromine bank in bromine spas and hot tubs.
1.
Maintain recommended daily levels as determined by testing kit.
Free
available bromine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total alkalinity:
100 - 120 ppm
Calcium hardness: 150 – 200 ppm
2. The
filtration system should be maintained in order to ensure proper disinfection.
3. Apply 6 g of EASY BROME per 1,000 L of spa water directly to bather-free
spa water with circulation system operating. Test for available bromine and repeat
above dosage at 15-20 minute intervals until a residual of 3.0 – 5.0 ppm is
reached.
4. Periodic superchlorination of spa water is recommended
after heavy use, or once a week, in moderately used spas to remove organic
waste. Apply 35 g of EASY BROME per 1,000 L of spa water as often as required.
Bathers should not use spa until reading drops to 5.0 ppm.
5. Persistent
foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer
levels. To correct such conditions, superoxidize water by adding 25 g of EASY
BROME per 1,000 L of spa water. Maintain circulation at least 30 minutes and wait
4 hours before using. EASY BROME contains stabilizer (cyanuric acid) which will
accumulate in spa water. Keep stabilizer within 30-100 ppm range by dilution with
fresh water.
6. For proper sanitation, spa must be completely drained
periodically.
BROMINE SANITATION:
Test
bromine levels daily.
Maintain a daily bromine sanitizer level of 3 – 5
ppm.
Use on initial fill of spa and weekly for maintenance.
Can be used to pre-treat bromine spas and hot tubs.
Buy29-21216-02*
Bromine Tablets
Item ID: (29-21055-15*) Brand: IPG
Product Variations
29-21055-70
Bromine Tablets - 700g
29-21055-15
Bromine Tablets - 1.5kg
Each 20 g tablet provides effective bromine sanitation
when used as directed.
Is an effective disinfectant when used as directed.
WARNING: Direct tablet contact may cause bleaching
of vinyl, acrylic or synthetic spa surfaces. Automatic feeding devices employing
these tablets must be totally free of other spa sanitizers to avoid the probability of
explosion.
1. If using an automatic feeding device, fill
the chamber(s) with tablets and adjust flow rate according to manufacture’s
recommendations to maintain proper bromine residual. Adding tablets to the spa’s
skimmer basket is an alternative bromine feed method. Daily usage should
approximate 5 g of BROMINE per 1,000 L of spa water. NOTE: heavy spa usage
and higher temperature usage rates may require higher usage rates to maintain
proper bromine residuals.
2. Periodic superchlorination
of spa water is recommended. Follow label instructions of superchlorination
product being employed.
3. Persistent foam formation,
turbid or malodorous water are indicators of inadequate sanitizer levels. To correct
such conditions, superchlorinate spa water by adding superchlorination product.
Maintain circulation at least 30 minutes and wait 4 hours before using.
4. For proper sanitation, spa must be drained periodically.
Extra
Item ID: (29-21245-80*) Brand: IPG
Product Variations
29-21245-80
Extra 800g
29-21245-02
Extra 2Kg
EXTRA
STABILIZED CHLORINATING TABLETS
29-21245
Each 15 g tablet provides effective chlorine sanitation when used as directed.
Is an effective disinfectant when used as directed.
WARNING: Direct tablet contact may cause bleaching of vinyl, acrylic or synthetic spa surfaces. Automatic feeding devices employing these tablets must be totally free of other spa sanitizers to avoid the probability of explosion.
1. Maintain recommended daily levels as determined by testing kit.
Free available chlorine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total alkalinity: 125 - 150 ppm
Calcium hardness: 150 – 200 ppm
2. Superchlorinate a freshly filled spa by adding 20 g of EXTRA per 1,000 L of spa water. Maintain water circulation for at least 1 hour before entering the spa (always measure your free available chlorine level before using the spa to make sure it falls within the recommended levels). Repeat superchlorination procedure after each use period.
3. If using an automatic feeding device, fill the chamber(s) with EXTRA tablets and adjust flow rate according to manufacture’s recommendations to maintain proper chlorine residual. Adding tablets to the spa’s skimmer basket is an alternative chlorine feed method.
4. Maintain proper chlorine residual by adding10 g of EXTRA per 1,000 L of spa water, daily or as needed.
5. Persistent foam formation, turbid or malodorous water are indicators of inadequate sanitizer levels. To correct such conditions, superchlorinate spa water by adding 30 g of EXTRA per 1,000L of spa water. Maintain circulation for at least 1 hour and wait 4 hours before using (always measure your free available chlorine level before using the spa to make sure it falls within the recommended levels).
6. Note on Superchlorination: EXTRA contains stabilizer (cyanuric acid) which can accumulate in spa water. Use of Spa Tab for superchlorination will raise stabilizer level at a faster rate. Keep stabilizer within the recommended range of 30-100 ppm by dilution with fresh water. Superchlorination with EXTRA will also lower total alkalinity. Make sure that the total alkalinity stays within recommended levels.
7. For proper sanitation, spa must be drained periodically.
SANITATION:
Test free available chlorine levels daily.
Maintain a daily free available chlorine sanitizer level of 3 – 5 ppm.
Check tablets regularly to ensure adequate sanitation and disinfection of spa water.
For proper sanitation spa must be drained periodically.
*
Quick 100
Item ID: (29-21210-80) Brand: IPG
A practical and easy to use sanitizer for spa and hot
tub water (dichlor).
1. Maintain recommended daily
levels as determined by testing kit.
Free available chlorine: 3.0 - 5.0
ppm
pH: 7.2 - 7.8
Total alkalinity: 100 - 120 ppm
Calcium hardness: 150 – 200 ppm
2. Superchlorinate a freshly
filled spa by adding 20 g of QUICK 100 per 1,000 L of spa water. Maintain water
circulation at least 15 minutes before using. Repeat superchlorination procedure
after each use period.
3. Maintain proper chlorine residual by adding 10
g of QUICK 100 per 1,000 L of spa water, daily or as needed.
4.
Persistent foam formation, turbid, or malodorous water, are indicators of
inadequate sanitizer levels. To correct such conditions, superchlorinate spa water
by adding 30 g of QUICK 100 per 1,000 L of spa water. Maintain circulation at least
30 minutes and wait 4 hours before using.
5. QUICK 100 contains
stabilizer (cyanuric acid) which will accumulate in spa water. Keep stabilizer within
the range of 30-100 ppm by dilution with fresh water.
6. For proper
sanitation, spa must be completely drained periodically.
CHLORINE SANITATION:
Test chlorine levels daily.
Maintain a daily free available chlorine level of 3 – 5 ppm.
Use
weekly and/or as required to superchlorinate and to ensure safe and enjoyable hot
tub or spa water.
Test pH regularly and adjust to 7.2 – 7.8 to ensure
proper water sanitation.
PRECAUTIONS:
CAUSES BURNS.
DANGEROUS FUMES FORM WHEN
MIXED WITH OTHER PRODUCTS.
Always add chemicals to water,
NEVER add water to chemicals!
Spa 2
Item ID: (29-21330-80*) Brand: IPG
Product Variations
29-21330-80
Spa 2 - 800g
29-21330-02
Spa 2 - 2kg
Size 800g
Also comes in 2.5Kg
SPA 2
2nd PART OF 2 PRODUCT
SANITIZER SYSTEM
29-21330
Provides
Bromine Sanitation when used with SPA 1.
1. SPA 2
must be used in combination with SPA 1 to effect bromine sanitation in spa waters.
2. Maintain recommended daily levels as determined by testing kit.
Bromine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total
alkalinity: 100 - 120 ppm
Calcium hardness: 150 – 200 ppm
3. Add SPA 1 to spa water as directed.
4. Treat a freshly filled spa
by adding 125 g of SPA 2 per 1,000 L of spa water to release bromine sanitizer
from the bromide salt solution of SPA 1. Maintain water circulation at least 30
minutes before using.
5. Maintain the proper bromine residual by adding
30 g of SPA 2 per 1,000 L of spa water, daily or as needed.
Persistent
foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer
levels. To correct such conditions, shock spa water by adding 125 g of SPA 2 per
1,000 L of spa water. Maintain circulation at least 30 minutes and wait four hours
before using.
6. For proper sanitation, spa must be completely drained
periodically.
BROMINE SANITATION:
2st part
of a 2 part sanitation system, provides bromine sanitation when used with SPA 1.
Test bromine levels daily.
Maintain a daily bromine sanitizer
level of 3 – 5 ppm.
Use on initial fill of spa and weekly for maintenance.
PRECAUTIONS:
CAUSES
BURNS.
DANGEROUS FUMES FORM WHEN MIXED WITH OTHER
PRODUCTS.
Always add chemicals to water, NEVER add water to
chemicals!
Spa Quick Tabs
Item ID: (29-21212-70*) Brand: IPG
Product Variations
29-21212-70
Spa Quick Tabs 700g
29-21212-04
Spa Quick Tabs 4kg
Spa Quick Tabs - Spa Sanitizer
Comes in 700g size and 4kg size.
*
Spa Zap
Item ID: (29-21370-40*) Brand: IPG
Product Variations
29-21350-300
Spa Zap 30g
29-21370-40
Zap Plus 12x40g
IPG Spa Zap
Buy29-21370-40*
SUMMER SMILES SPA PEROXY MAX
Item ID: (29-07090-25) Brand: Sani Marc
Instant Clarifier
SPA PEROXY MAX is a complement to SPA PEROXY SHOK. SPA PEROXY MAX optimizes the efficiency of the hydrogen peroxide-based treatment by capturing the particles that can prevent hydrogen peroxide from working properly.
Benefits
Improves the effectiveness of SPA PEROXY SHOK by allowing the small particles that can prevent the activated oxygen from working properly to be captured.
SPA PEROXY SHOK is an ultra-powerful shock treatment containing 29% hydrogen peroxide. It quickly eliminates organic waste caused by perspiration, soap and other organic materials. Its stabilized formula stays active longer, prolonging its efficacy. Regular use of SPA PEROXY SHOK reduces the amount of sanitizer needed. For best results, always follow the instructions on the label. For optimal results, SPA PEROXY SHOK should be used in combination with SPA PEROXY MAX.
SPA PEROXY SHOK is an ultra-powerful shock treatment containing 29% hydrogen peroxide. It quickly eliminates organic waste caused by perspiration, soap and other organic materials. Its stabilized formula stays active longer, prolonging its efficacy. Regular use of SPA PEROXY SHOK reduces the amount of sanitizer needed. For best results, always follow the instructions on the label. For optimal results, SPA PEROXY SHOK should be used in combination with SPA PEROXY MAX.