Hot Tub Balancers
Please note: Not all products are in-stock and may require to be ordered. Please call store for inventory details.
Please note: Not all products are stocked and may require to be ordered. Please call store for inventory details.
<< Back
Alkalinity Plus
Item ID: (29-21980-50*)
Brand: IPG
Product Variations
29-21980-50
Spa Alkalinity Plus
29-21980-01
Spa Alkalinity Plus 1kg
ALKALINITY+
INCREASES ALKALINITY
AND CONTROLS pH FLUCTUATION
Helps maintain
balanced pH levels.
Insures better bather comfort.
Protects
spa equipment.
1. Total alkalinity levels should be
tested often and maintained in the range 100 to 150 ppm.
2. If level is
below 100 ppm, add 20 g of ALKALINITY+ per 1,000L of spa water to raise
alkalinity by 10 ppm.
3. Pour directly into spa water with the spa in
operation.
4. Wait 15 minutes before using spa.
Total alkalinity is the measure of the ability of the water to resist changes in
pH, it effects and controls the pH and is a pH buffer.
Low total alkalinity
causes excessive pH fluctuation and can cause corrosion of spa surfaces and
equipment.
The ideal range for Total Alkalinity is 125-150 ppm.
Test regularly and use when required.
Alkalinity Minus
Item ID: (29-21981-11)
Brand: IPG
ALKALINITY-
ALKALINITY
REDUCER
Helps reduce alkalinity in spa water to avoid
scale formation.
Odourless, 100% soluble formula acts rapidly in hot
water.
Does not influence total dissolved solids like regular granular
formulas.
1. Maintain proper daily levels:
pH:
7.2-7.8
Alkalinity: 100-150 ppm
2. If levels are higher, add 60
mL of ALKALINITY- per 1,000 L of spa water to decrease pH 0.4 and alkalinity of
14 ppm.
3. Spa must be in operation before ALKALINITY-.
4.
Wait 15 minutes and retest pH and alkalinity.
5. Repeat operation until
recommended levels are reached.
TOTAL ALKALINITY:
Total alkalinity is the measure of the ability of the water to resist
changes in pH, it effects and controls the pH and is a pH buffer.
High
Total alkalinity makes the pH difficult to adjust and causes scale formation.
The ideal range for Total Alkalinity is 125-150 ppm.
Test regularly
and use when required.
Calcium Plus
Item ID: (29-21501-50*)
Brand: IPG
Product Variations
29-21501-50
Calcium Plus
29-21501-11
Calcium Plus 1L
CALCIUM+
HARDNESS
INCREASER
29-21501
Ideal product to
prevent and stop corrosion of equipment.
Concentrate liquid formula
that does not leave powdery residue and provides quick results.
1. Hardness level should be tested often and maintained in the range of
100 to 200 ppm.
2. If level is below 100 ppm add 110 mL of CALCIUM+
per 1,000 L of spa water to raise hardness by 50 ppm.
3. Pour solution
directly into spa water with the spa in operation.
4. Wait 15 minutes
before using spa.
CALCIUM HARDNESS:
Hardness is the total dissolved mineral content of the spa water and is made
up of mainly calcium and magnesium.
The ideal range for calcium
hardness is 100-200 ppm.
Use on initial fill of spa or when required.
PRECAUTIONS:
Always add chemicals to water, NEVER add
water to chemicals!
Carefully read and follow all label directions before
use.
Never mix with other chemical.
PH Plus
Item ID: (29-21190-50*)
Brand: IPG
Product Variations
29-21190-50
PH Plus
29-21190-11
PH Plus - 1L
RAISES THE pH in Hot Water
To achieve
maximum sanitizer efficiency and to avoid corrosion of surfaces, your water's pH
should be between 7.2 and 7.8. Maintaining a balanced pH will ensure better
bather’s comfort and protect spa equipment
Green formula
ECOLOGO Certified Pool and Spa Water Treatment Products CCD-171
1. To increase pH to recommended levels, add the required
quantity of pH+ according to the chart below:
pH reading for
1,000 L below 6.6 - 10 g
6.6 to 7.0 - 7.5
g
7.0 to 7.4 - 5 g
2. Pour directly pH+ into spa water
with the spa in operation.
3. Wait 15 minutes and retest pH and
alkalinity.
4. Repeat operation until recommended levels are reached.
PRECAUTIONS:
MAY IRRITATE EYES. Do
not mix with any other chemical. Do not get in eyes. Keep out of reach of children.
FIRST AID TREATMENT:
Contains: sodium carbonate. If
swallowed, call a Poison Control Centre or doctor immediately. Do not induce
vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.
PH Minus
Item ID: (29-21181-50*)
Brand: IPG
Product Variations
29-21181-50
Spa pH Minus
29-21181-11
Spa pH Minus 1L
Helps reduce pH and alkalinity in spa water to avoid
scale formation.
Odourless, 100% soluble formula acts rapidly in hot
water.
Does not influence total dissolved solids like regular granular
formulas.
Green formula
ECOLOGO Certified Pool and Spa
Water Treatment Products CCD-171
1. Maintain proper
daily levels:
pH: 7.2-7.8
Alkalinity: 100-150 ppm
2.
If levels are higher, add 60 mL of pH- per 1,000 L of spa water to decrease pH 0.4
and alkalinity by 14 ppm.
3. Spa must be in operation before pH-.
4. Wait 15 minutes and retest pH and alkalinity.
5. Repeat
operation until recommended levels are reached.
TOTAL ALKALINITY:
In order to balance the pH the Total Alkalinity
must be balanced.
Total alkalinity is the measure of the ability of the
water to resist changes in pH, it effects and controls the pH and is a pH buffer.
High Total alkalinity makes the pH difficult to adjust and causes scale
formation.
The ideal range for Total Alkalinity is 125-150 ppm.
Test regularly and use when required.
PRECAUTIONS:
CAUSES BURNS.
DANGEROUS
FUMES FORM WHEN MIXED WITH OTHER PRODUCTS.
Always add
chemicals to water, NEVER add water to chemicals!